SimLink server setup

[ATC_ROO]

Updated the first page with new Easier instructions on how to connect to the MSFlights FSD server.

[Karl]

Thank you once again Mike. Just so it doesn't get lost, here's my wish list (pretty please!). Any chance of adding the following some time?

• Four props, something that would suit the C-130 and An-12 (high wing) and/or Constellation and C-97 (low wing).
• Three props, that would suit the Ford Trimotor (high wing) and/or Junkers Ju-52 (low wing).
• Biplane single, for the Jenny and Tiger Moth.

(I know there's a C-130, and I guess I can use it for the low wings, but it's not in the complete list.)

Until there are AI models you can use the ones in your current hangar. I think you have the Captain Sim C-130.

<ModelMatchRule TypeCode="AN12" ModelName="Antonov An-12BK ATRAN Cargo AL (Russia)" />
<ModelMatchRule TypeCode="AN32" ModelName="AN-32_Aer_Caribe" />
<ModelMatchRule TypeCode="C130" ModelName="CS C130Extra1 0//CS C130Extra1 1//CS C130Extra1 2"/>



Those are lines out of a model matching rule set that I created and added to Vpilot.

[Storm]

Thank you once again Mike. Just so it doesn't get lost, here's my wish list (pretty please!). Any chance of adding the following some time?

• Four props, something that would suit the C-130 and An-12 (high wing) and/or Constellation and C-97 (low wing).
• Three props, that would suit the Ford Trimotor (high wing) and/or Junkers Ju-52 (low wing).
• Biplane single, for the Jenny and Tiger Moth.

(I know there's a C-130, and I guess I can use it for the low wings, but it's not in the complete list.)

[N404]

Default model matching have been updated to include helicopters.
Happy Landings and ChopChoping

[ATC_ROO]

The only minor difficulties encountered during the software-test include:
1. Interference with VATSIM traffic up-dated in Euroscope on a regular basis regardless of the off-line status.

Turn off simulated traffic in QUICK SET in Euroscope.

2. Some pilots in the server could not appear on the aircraft list.

Will be a Euroscope setting.
Is show standby aircraft enabled?

3. Some aircrafts, dispite the fact that they were squawking mode C, appeared on the radar as unidentified once airborn.

Again will be a setting in ES although not sure which one.

Did you try using the Matias file I added a link too and the Tag family I created call ATC_ROO?

[Travis]

I agree with you duke, I was planning on mentioning this during our meeting today.

[Captain Duke]

I have now found a map which shows both ATC and Pilots on the server and also their flight plan if one is filed.

Should help people that were wondering were everybody else was.

FSD SERVER MAP!

This is awesome ROO. May I respectfully request that this link be placed in the top right of our home page in the multiplayer servers box? Will this be replacing the Serveinfo utility you wrote or can they be used side by side if desired? Thank you for your work on this platform.

Bobby

[ATC_ROO]

If anyone could help me with this it would be great i try to open vpilot but an error sign appears and after i hit ok the app crashes this is what it says.



I am running Windows 10
If i dont get this fixed i cant run fsd. If someone can help that would be great.

Your missing some Libraraies Little Cube.

See this post for the simple fix.

[ATC_ROO]

I have now found a map which shows both ATC and Pilots on the server and also their flight plan if one is filed.

Should help people that were wondering were everybody else was.

FSD SERVER MAP!

[Cube]

If anyone could help me with this it would be great i try to open vpilot but an error sign appears and after i hit ok the app crashes this is what it says.



I am running Windows 10
If i dont get this fixed i cant run fsd. If someone can help that would be great.

[claver95]

First I would like to express my genuine appreciation of the fact that MSF is actively and constantly trying to improve the quality of the simulation experience for its members and guests. Today I jumped on the occassion when I found out that a new software was out for members to test.
I tested FSD from the perspective of the controller using Euroscope. Although sophisticated and complex, Euroscope gave me the realism that I needed in terms of accessibility to time-saving data such as SIDs, STARs, METAR, flightplans, and a clear symbology on the ground and in the air.
The only minor difficulties encountered during the software-test include:
1. Interference with VATSIM traffic up-dated in Euroscope on a regular basis regardless of the off-line status.
2. Some pilots in the server could not appear on the aircraft list.
3. Some aircrafts, dispite the fact that they were squawking mode C, appeared on the radar as unidentified once airborn.
On a small controlling scale these small problems could be ignored. However when managing a higher traffic flow, they will potentially overwhelm controllers.
P.S: I have experience using Euroscope in the past.

[Karl]

Re: vPilot commands

During the first period of time that debugging (.debug) command is very useful. You can add/remove matching sets then reload what is currently active without having to exit/restart the program.

[ATC_ROO]

.chat CALLSIGN	Opens a new chat tab (or switches to the existing tab) for the specified callsign.
.close	Closes the current chat tab.
.atis CALLSIGN	Request the controller information for the specified callsign.
.msg CALLSIGN message	Sends the specified private message to the specified callsign.
.wx STATION-ID	Requests the weather (as a METAR) for the specified station ID.
.metar STATION-ID	Requests the weather (as a METAR) for the specified station ID.
.wallop message	Sends a "wallop" to all supervisors on the network.
.copy	Copies the contents of the active tab to your clipboard.
.clear	Clears the contents of the active tab.
.reloadrules	Reloads the model matching rule sets.
.x SQUAWK-CODE	Sets your transponder to the specified code. Can also use .xpdr, .xpndr, .sq, or .squawk.
.com1 FREQUENCY	Sets the COM1 radio to the specified frequency.
.com2 FREQUENCY	Sets the COM2 radio to the specified frequency.
.com 1	Enables the COM1 radio for transmit.
.com 2	Enables the COM2 radio for transmit.
.com both	Toggles receiving on both COM radios simultaneously.
.testmodelmatching	Opens a window where you can run a test of all the model matching rules you have loaded.
.debug	Displays a debugging window.

So for example .metar KLAX would show you the weather for LAX.
.msg BAW123 Hello how are you? Would send a message to the callsign BAW123 saying Hello how are you?

[Pops0]

I agree whole heartedly!

Thanks Roo,

Servinfo works great. I "see" myself on the ramp in PHNL. Thank you for your work.

[Captain Duke]

Thanks Roo,

Servinfo works great. I "see" myself on the ramp in PHNL. Thank you for your work.