JoinFS can be used on MSFS, FSX, P3D, and X-Plane!

1. Download latest JoinFS from here: http://pmem.uk/joinfs/install.html (download link is near top of the page)
2. If using MSFS, FSX, or P3D and you have not manually installed SimConnect before, you can download it here: https://pmem.uk/SimConnect.msi
3. Open your simulator and load into your plane at your desired location. Then open JoinFS.
4. Go to File>Settings... and set your Nickname (please use your Discord or Forum name)
5. To join us in a group flight, click the button on the bottom right side of the window that says "Join Global" (unless otherwise specified in the event post).
Optional:
6. You may need to scan for models for model matching. This is done by...
* Click File>Scan for Models... to select your simulator folder then scan for models.
-If you want to change someones model manually, you must click View>Aircraft then right click the person you want to change and click Substitute.
-If the distance is shown in red, this means the model you chose is likely not compatible for your sim, and you must choose another and reopen JoinFS.
-You can change default matching by clicking File>Model Matching... then right clicking and choosing Substitute.


If you can not get connected, please feel free to ask.
Please note: At this time, labels on other aircraft do not show if you are using MSFS