Announcement

Collapse
No announcement yet.

ORBX Vector - Terrain mesh issues

Collapse
X
  •  
  • Filter
  • Time
  • Show
Clear All
new posts

  • ORBX Vector - Terrain mesh issues

    Good evening,

    Recently installed both ORBX Global and ORBX Global Vector, and was until I opened FSX, excited for what was to come.
    Thereafter, after selecting the airport LFKC (St Catherine), on the island of Corsica, I got a bit upset.

    Before running the Vector AEC program, I came upon this, which does not really look good:



    I then went back to the AEC program, and applied the saved data from this user (http://msflights.net/forum/showthrea...ector-and-Mesh), which did correct atleast the big holes. However, it did not do the job 100 %.

    Once done, it looks like this:






    Regarding to the scenery library (if that matters), all Vector items are ranked 1-5, meaning from the top. Also, I have no addons at the airport in question, nor at other airports where this happens (i.e KASE/Aspen Pitkin). Neither do I have GEX, UTX or something like that installed.

    Is there anyone who could assist me on this matter? I really want this to work..


    Sincerely.

  • #2
    I had similar issues, and after trying a few things that didn't solve the problems, I simply disabled AEC and everything appeared normal. Can't say I feel any great loss at having it disabled, but some might.
    [img]http://www.msflights.net/pilots/phpvms/lib/signatures/MSF0558.png[/img]

    Comment


    • #3
      I had somewhat similar issues before in FSX. To fix my problem I reinstalled vector update 1.15. It is no longer available on the site now. Is your vector updated to latest 1.35? Do you have issues anywhere else. It could be a problem with the Orbx and something they may have to fix.

      Comment


      • #4
        Hi Intuitive,

        your issue is the fact that you have the vector items so high in your scenery library. This means they are overriding everything else. Please refer to the Orbx user guide (accessible from the Orbx FTX Central application) for information on the correct placement of Orbx items in your scenery library.

        Safe Skies

        Novawing24
        Per Ardua Ad Astra

        Check out my videos at http://www.youtube.com/user/Novawing24
        Join me on Facebook! http://www.facebook.com/Novawing24
        Follow me on Twitter! https://twitter.com/novawing24
        Official Novawing24 website! http://www.novawing24.com
        My Onedrive! http://tinyurl.com/novawing24-onedrive

        Comment


        • #5
          You never touch the Vector entries in the scenery library, they stay where they are installed, but the mesh should be on top of the higher 4 AEC entries. In the FTX Central V2 down left corner is a manual , where the entries are explained and how to do, Read It.





          And make shure, to run after every install or uninstall of a scenery or addon the Vector Configurator

          CaseyRyback59/Andreas
          Staff Member
          VA-Manager

          Comment


          • #6
            Hey again fokes, and thank you for the informative replies.

            I tried to reinstall Vector but the same thing happened, so I decided not to go with Vector.
            Instead I got only the Global Base-pack, but when I start at Stewart (CZST), this happens - eventhough Vector is not installed.
            I have also attached my settings, which I have not touched at all.






            EDIT*
            Once I apply the North America pack in the FTX Central, it gets fine, but then on the other hand I lose the textures with the base pack around the rest of the world right? WHAT DO I DO!
            !


            Sincerely,

            Comment


            • #7
              Have you tried Hybrid mode?

              Are you using any terrain mesh or just default?

              And did you review the manual as advised by Casey and I?
              Per Ardua Ad Astra

              Check out my videos at http://www.youtube.com/user/Novawing24
              Join me on Facebook! http://www.facebook.com/Novawing24
              Follow me on Twitter! https://twitter.com/novawing24
              Official Novawing24 website! http://www.novawing24.com
              My Onedrive! http://tinyurl.com/novawing24-onedrive

              Comment


              • #8
                I have not tried that due to that it does not show up somehow..
                Here's a screenshot of how it looks:

                I have only got the ORBX addons (NZ) (PCFJORDS) alongside with the Global base pack, so no other mesh addons.

                I did, but did not manage to find that? (referring to image above)

                Comment


                • #9
                  You should really update to FTX Central 2

                  Comment


                  • #10
                    So, when i see that u still running the old FTX Central means you DO NOT run the latest ORBXLIBS, what is RECOMMEND. It includes the New FTX Central V2 and the Vector Configurator, if Vector is installed. Do this first and post your version numbers of all your installed ORBX Products for more help. Further try to get more help on the ORBX Forums.... http://www.orbxsystems.com/forum/
                    CaseyRyback59/Andreas
                    Staff Member
                    VA-Manager

                    Comment


                    • #11
                      Downloading the new FTX Central v2, did sort out the problem

                      Thanks for the quick help you lot.

                      Comment

                      Sorry, you are not authorized to view this page
                      Who has read this thread:
                      Working...
                      X