if you do go to flyaway simulations and click fsx section and go to sound and go to bottom of that page and click on peter james sound jet pack set. it really makes you feel like you are being thrown thru the windsheild when the engines goes into reverse. all the sound items goes in sound folder and the ones in the regular folders goes in regular plane folders. i have all my planes set to his setup. man does the planes stop NOW not later.http://downloads.flyawaysimulation.com/pjfsxjet.zip
it also makes the engines in reverse louder just like in real life
here is what i did for these two planes
here is what you look for these is for 2 different planes
before changes
[GeneralEngineData]
engine_type= 1
Engine.0= 5.500, -26.667, -5.583
Engine.1= 5.500, 26.667, -5.583
fuel_flow_scalar= 0.7120
min_throttle_limit=-0.319946 erase the to the dot and put 70 see after changes below
after changes
[GeneralEngineData]
engine_type= 1
Engine.0= 5.500, -26.667, -5.583
Engine.1= 5.500, 26.667, -5.583
fuel_flow_scalar= 0.7120
min_throttle_limit=-0.70
first create new folder on desktop
select plane
go to air cfg and click on to open
scroll down to general engine data
erase min throttle numbers back to the dot then put 70 in that line
save as
click on desk top and find the folder you just added click to open
click save till the file is saved to new folder
then drag new cfg file to plane folder and replace with new cfg you just made
all done
i tested using a a 380 to 170 mph and dumped spoiles and reverse engines at eddm and had plenty room to stop. also used a 747 with same results 170 which is pass v1 speed and room to spare for stopping
it also makes the engines in reverse louder just like in real life
here is what i did for these two planes
here is what you look for these is for 2 different planes
before changes
[GeneralEngineData]
engine_type= 1
Engine.0= 5.500, -26.667, -5.583
Engine.1= 5.500, 26.667, -5.583
fuel_flow_scalar= 0.7120
min_throttle_limit=-0.319946 erase the to the dot and put 70 see after changes below
after changes
[GeneralEngineData]
engine_type= 1
Engine.0= 5.500, -26.667, -5.583
Engine.1= 5.500, 26.667, -5.583
fuel_flow_scalar= 0.7120
min_throttle_limit=-0.70
first create new folder on desktop
select plane
go to air cfg and click on to open
scroll down to general engine data
erase min throttle numbers back to the dot then put 70 in that line
save as
click on desk top and find the folder you just added click to open
click save till the file is saved to new folder
then drag new cfg file to plane folder and replace with new cfg you just made
all done
i tested using a a 380 to 170 mph and dumped spoiles and reverse engines at eddm and had plenty room to stop. also used a 747 with same results 170 which is pass v1 speed and room to spare for stopping
Comment